Overview

Where hardware and software stop being separate projects

Most embedded problems are interface problems. A peripheral that behaves differently from the datasheet, a timing assumption nobody wrote down, an interrupt that occasionally arrives during the wrong operation — these are not software bugs or hardware bugs, they are integration bugs.

We work at that boundary. Processor and peripheral selection is made with the software architecture in mind; memory, timing and power behaviour are budgeted before code exists; register maps, error behaviour and startup sequences are treated as documented interfaces.

The result is a system where bring-up is a planned activity with expected outcomes, rather than a period of open-ended debugging.

Architecture, peripherals, timing Hardware
Drivers, scheduling, diagnostics Software
Register maps and error behaviour Boundary
Measured bring-up, not assumed Evidence

Embedded scope

What embedded systems engineering covers

From choosing the processor to proving the system behaves under load.

System architecture

Processing, memory, peripherals, timing and power decided as one design, with the software structure informing the hardware choices.

Selection

Platform, toolchain and reference designs are selected per project.

Engineering approach

How an embedded system is brought to life

Bring-up is planned as engineering work with defined checkpoints, not treated as a debugging phase.

  1. System definition

    Functional behaviour, timing requirements, interfaces, power budget, memory expectations and the operating states the system must handle.

  2. Architecture and platform

    Processor and peripheral selection with the software architecture sketched alongside it, so neither side surprises the other.

  3. Interface contracts

    Register maps, timing assumptions, startup sequences and error behaviour written down before implementation.

  4. Bring-up

    Power, clocks and boot first, then memory, then peripherals individually, each verified with measurement.

  5. Integration

    Subsystems combined and exercised together, including the awkward cases: startup, recovery, fault handling and concurrent load.

  6. Verification

    Behaviour tested against the defined requirements, including timing under worst-case rather than typical conditions.

  7. Deployment preparation

    Production programming, diagnostics, update mechanism and the tooling the manufacturing and support teams will need.

Integration

Bring-up is planned work, not a debugging phase

Power and clocks first, then boot, then memory, then peripherals one at a time. Each step has an expected result and a measurement that confirms it.

When something fails, it fails in isolation — which is the difference between a morning and a fortnight.

Technical illustration of an embedded system architecture mapping processor, peripherals, memory and software layers
Embedded system architecture

Platforms

Where the embedded work happens

Systems we engineer

Microcontroller-based control and sensing productsProcessor-based devices running embedded LinuxReal-time control systems with hard timing requirementsConnected devices combining sensing, processing and communicationProducts needing reliable field update mechanismsExisting embedded platforms requiring modernisation or extension

Technology domains

MCU platformsMPU platformsRTOSEmbedded LinuxDriversBootloadersDiagnostics

FAQ

Embedded systems questions

What teams typically ask when scoping an embedded project.

Ask our team

Next step

Embedded project that keeps hitting integration problems?

Tell us what the system has to do and where it is failing. We will tell you what we would check first.